Automatic Fish Skinner

CBF 496

Automatic fish skinner with CF technology and universal application.
cutting width: 430 mm
cutting speed: 29 m/min
infeed conveyor
discharge conveyor
tooth roller (AISI 316L) with grooves and scraper comb (CF technology)
water cleaning unit for steady continuous operation
blade gap infinitely adjustable
spring suspended blade holder for perfect skinning results
pressure units with counter weights, infinitely adjustable
special hard pressure roller for fish
inflated pressure balloon
discharge conveyor for removed skin
transport roller with coarse or fine toothing
turn around device for the automatic skinning of both sides of flat fish with 2 machines
foot switch
Cleaning trolley for storage and cleaning of dismountable parts like: conveyors, belts, pressure roller and blade holder

CORTEX CBF 496 SALMON

CBF 496

Automatic fish skinner with NOCK ACTIVE SKIN GRIPPER® optimized for skinning fresh and smoked salmon.
Cutting width: 430 mm
Cutting speed: 29 m/min
infeed conveyor
discharge conveyor
lockable castors
stainless steel
stainless steel bearings
blade gap infinitely adjustable
pneumatically suspended blade holder for perfect skinning results
pressure unit with counter weights, infinitely adjustable
special hard pressure roller for salmon, made of polyamide with very long lifetime and more pressure in the middle of the fillet (less pressure at the sides of the fillets = less loss when deep skinning)
water cleaning unit for steady continuous operation when processing fresh fillets
infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
inflated pressure balloon
discharge conveyor for removed skin
additional possibility of positioning of output conveyor for easy bringing together skin and fillet
transfer plate on which fillets pass through without being skinned
double lane model (Cortex CBF 496/7 SALMON TWIN)

CBF 496/7

CORTEX CBF 496/7 SALMON TWIN SKINNER

Automatic two lines fish skinner with CF technology and application for Salmon skinning.
cutting width: 2 x 300 mm (double lane)
cutting speed: 29 m/min
infeed conveyor
discharge conveyor
discharge conveyor for removed skin
transfer plates on which fillets pass through without being skinned
Features:
3 methods of skinning:
deep skinning with sharp blade
thin skinning (shallow skinning) with sharp blade
pulling-off the skin with blunt blade (silver skinning)
blade gap independently and infinitely adjustable on the right and left side
pneumatically suspended blade holders for perfect skinning results
pressure units with counter weights, infinitely adjustable

SB 496

SKINEX SB 496 FISH SKINNER

Automatic fish skinner with S technology and special application for low-loss skinning of fish with thin skin..
cutting width: 430 mm
cutting speed: 29 m/min
Features:
lockable castors
stainless steel
stainless steel bearings
3 methods of skinning:
deep skinning with sharp blade
thin skinning (shallow skinning) with sharp blade
pulling-off the skin with blunt blade (silver skinning)
infeed conveyor
discharge conveyor
transport roller (AISI 316L) without peripheral grooves, with dynamic cleaning roller made of stainless steel (S technology)
water cleaning unit for steady continuous operation
blade gap infinitely adjustable
spring suspended blade holder for perfect skinning results
depending on the product, pressure roller spring suspended and with airfilled balloon or with special hard pressure roller for fish with adjustable balance weights
infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools
discharge conveyor for removed skin
transport roller with coarse toothing
foot switch and infeed table for “manual” operation with open top machine

QS 888

SKINEX QS 888 FISH SKINNER

A fish skinner is a tool that is used to remove the skin from a fish.
Cutting width: 2 x 200 mm
Capacity: more than 200 fillets/min, depending on the size of the fillets
Features:
lockable castors
stainless steel
stainless steel bearings
discharge conveyor for removed skin
longer infeed conveyor
transport roller with coarse or fine toothing
replacement model of the successful Skinex SB 495/T TWIN with even easier operation
perfect substitute of old BAADER 51, with additional advantage of more skinning methods
3 methods of skinning:
- thin skinning (shallow skinning) with sharp blade
- pulling-off the skin with blunt blade (silver skinning)
- deep skinning with sharp blade (restricted)
infeed conveyor
discharge conveyor
divided pressure roller (spring suspended) for double lane feeding
transport roller (AISI 316L) without peripheral grooves, with dynamic cleaning roller made of stainless steel (S technology)
water cleaning unit for steady continuous operation
blade gap infinitely adjustable
spring suspended blade holder for perfect skinning results
special pressure rollers made of polyamide for gentle processing, easy handling and long durability
infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any too

QS 98

SKINEX QS 98 FISH SKINNER

Automatic fish skinner with double lane feeding and very high capacity.
Cutting width: 2 x 200 mm
Capacity: more than 200 fillets/min. (depending on the size of the fillets)
lockable castors
stainless steel
stainless steel bearings
discharge conveyor for removed skin
longer infeed conveyor
transport roller with coarse or fine toothing
conveyorized double lane fish skinning machine withS technology
sister model of the QS 888 with modified skinning unit
perfect substitute of old BAADER 51, with additional advantage of more skinning methods
3 methods of skinning:
- thin skinning (shallow skinning) with sharp blade
- pulling-off the skin with blunt blade(silver skinning)
- deep skinning with sharp blade (restricted)
infeed conveyor
discharge conveyor
divided pressure roller (spring suspended) for double lane feeding
transport roller (AISI 316L) without peripheral grooves, with dynamic cleaning roller made of stainless steel (S technology)
water cleaning unit for steady continuous operation
blade gap infinitely adjustable
spring suspended blade holder for perfect skinning results
special pressure rollers made of polyamide for gentle processing, easy handling and long durability
infeed conveyor and discharge conveyor; can be taken out of the machine within seconds without any tools

TFE 350
· TFE 550

FREEZE DRUM SKINNER TFE 350 · TFE 550 FISH SKINNER

These results in fish skinning machines with reliable German machine engineering, high quality, high energy efficiency, easy cleaning and compact dimension. Above this the service friendly construction causes low follow-up costs.
Skinning depth: up to 10 mm stepless

Cutting width: 370 / 570 mm
Cutting speed: 8 - 20 m/min
form of application: skin side up
Features:
2 - 5 % higher yield than other fish skinning machines when thin skinning
large tolerance to structure and different size of the fillets of various kinds of fish
energy-efficient freeze drum and refrigeration aggregate for particularly low energy consumption. Hard anodized surface.
refrigeration aggregate with air-cooled condenser (type A2) or with water-cooled condenser (type W2)
frequency converter for stepless adjustment of the operational speed
transfer function for transfer without processing
rotating band blade with high precision guide for constant and also very thin skinning.
infinitely variable cutting thickness adjustment, even during operation
water jets and scraper keep the band blade clean during operation. Easy cleaning without tools.
band blade can be simply and quickly replaced.
integrated blade sharpening device
conveyor equipped with 4 mm round belts (other diameters upon request). Does not need to be removed from the machine to change the round belts.
water jets so that the product will freeze reliably on to the freeze drum; low water consumption.
mobile machine with lockable castors
stainless steel housing with large smooth surfaces and special operation mode for easy cleaning after production: conveyor and drum operate, refrigeration aggregate and band blade remain stopped

CF 460

CORTEX CF 460 FISH SKINNER

Open Top fish skinner with CF technology and universal application.
Cutting width: 430 mm
Cutting speed: 24 m/min

machine construction which is easy to clean, for outstanding robustness and service friendliness
Features:
open top fish skinning machine with CF technology
3 methods of skinning:
- thin skinning (shallow skinning) with sharp blade
- pulling-off the skin with blunt blade (silver skinning)
- restircted: deep skinning with sharp blade
Application:
universal application for many fish species
special application for fish with thick skin, e.g. salmon, salmon trout, flat fish like plaice or sole, etc.
also suitable to skin fish with thin skin.
transport roller with different toothing
feeding unit for secure skinning of smaller fish.

tooth roller (AISI 316L) with grooves and scraper comb (CF technology)

water cleaning unit for steady continuous operation

blade gap infinitely adjustable

spring suspended blade holder for perfect skinning results

ergonomic favourable foot switch bar, adjustable in height

S 460

SKINEX S 460 FISH SKINNER

Open top fish skinner with S technology and special application for low-loss fish skinning with thin skin.
Cutting width: 430 mm
Cutting speed: 32 m/min
lockable castors
stainless steel
Features:
open top fish skinning machine with S technology
3 methods of skinning:
- thin skinning (shallow skinning) with sharp blade
- pulling-off the skin with blunt blade (silver skinning)
- restricted: deep skinning with sharp blade
Application:
special application for low-loss skinning of fish with thin skin, e.g. tilapia, pangasius (basa), trout, cod, catfish, squid etc.
skinning of flat fish e.g. plaice, sole.
transport roller (AISI 316L) without peripheral grooves, with dynamic cleaning roller made of stainless steel (S technology)
water cleaning unit for steady continuous operation
blade gap infinitely adjustable
spring suspended blade holder for perfect skinning results
ergonomic favourable foot switch bar, adjustable in height
Machine construction which is easy to clean, for outstanding
transport roller with coarse or fine toothing
feeding unit for secure skinning of smaller fish

CF 420

CORTEX CF 420 FISH SKINNER

Cutting width: 430 mm
Cutting speed: 19 m/min
Features:
foot switch
carry handles
stainless steel
underfunded with castors
transport roller with different toothing
open top fish skinning machine (table model) with CF technology
3 methods of skinning:
- thin skinning (shallow skinning) with sharp blade
- pulling-off the skin with blunt blade (silver skinning)
- restricted: deep skinning with sharp blade
application:
special application for fish with thick skin, e.g. salmon, salmon trout, flat fish like plaice or sole, etc.
universal application for many fish species
tooth roller (AISI 316L) with grooves and scraper comb (CF technology)
water cleaning unit for steady continuous operation
blade gap infinitely adjustable

S 420

Skinex S 420 fish skinner

Small fish skinner table model for universal application in catering and trading.
foot switch
carry handles
stainless steel
Cutting width: 280 mm
Cutting speed: 19 m/min
Water cleaning unit
blade gap infinitely adjustable
Features:
3 methods of skinning:
thin skinning (shallow skinning) with sharp blade
pulling-off the skin with blunt blade (silver skinning)
restricted: deep skinning with sharp blade
application:
perfect machine for the shop counter of the fish trade and for the catering trade
small open top table model for the skinning of many fish species

CF 300

CORTEX CF 300 COUNTERBOY FISH SKINNER

if you want to know about the Commercial Meat cutting Machine price in India, fish cutting machine price in India, Bone saw machine price in India, Canned Meat Cutting Machine, Meat Bandsaw Machine, Bone sawing Machine, Meat saw machine, meat cutter, Bone saw cutter, meat bone cutting machine, bone saw machine, commercial meat saw, bone saw machine suppliers. We are looking for bulk inquiries from Mumbai, Chennai, Kolkata, Bangalore, Ahmadabad, Hyderabad, Lucknow, Kanpur, Varanasi, Jaipur, Varanasi , Jodhpur, Ajmer, Bikaner, Kota, Udaipur, Agra, Meerut, Bhilwara, Alwar, , Aligarh, Allahabad, Banaras, Mathura, Uttar Pradesh, Jhansi, Ghaziabad, Noida, Bareilly, Moradabad, Saharanpur, Punjab, Chandigarh, Jalandhar, Amritsar, Ludhiana, Bathinda, Pathankot, Patiala, Hoshiarpur, Himachal Pradesh, HP, UP, MP, Shimla, Dharamshala, Uttrakhand, Dehradun, Haridwar, Roorkee, Rishikesh, Rudrapur, Nainital, Udham Singh Nagar, Indore, Bhopal, Jabalpur, Gwalior, Ujjain, Sagar, Ratlam, Satna, Bhavnagar, Jamnagar, Karnataka, Gandhinagar, Davanagere, Belgaum, Hubli, Chitradurga, Coimbatore, Tamilnadu, Madurai, Salem, Gujrat, Surat, Dewas , Vadodara, Rajkot, Trichy, Tiruppur, Erode, Vellore, Kerela, Kochi, Thiruvananthapuram, Kozhikode, AP, Andhra Pradesh, Visakhapatnam, Vijayawada, Warangal, Guntur, Nellore, West Bengal, Asansol, Siliguri, Durgapur, Bardhaman, Bihar, Patna, Gaya, Bhagalpur, Muzaffarpur, Jharkhand, Jamshedpur, Dhanbad, Assam, Guwahati, Ranchi, Agartala, Shillong, Haryana, Karnal, Ambala, Panipat, Rohtak, Hisar, Faridabad, Gurgaon, Maharashtra, Pune, Nagpur, Thane, Nasik, Aurangabad, Rajasthan, Goa, Jammu, Srinagar, J&K, Chhattisgarh, Raipur, Bilaspur, Korba, Odisha , Bhilai, Cuttack, Rourkela, Bhubaneswar, Navi Mumbai, Puducherry , Virar, Kalyan, Bhiwandi, and all over India.

The Buffalo chopper, also known as a bowl chopper or food cutter, food chopper is a machine that chops or emulsifies food by rotating it in a bowl under spinning blades. To know more details click on the given link

To Know about the commercial meat dicer Machines Market Size 2021 Development Forecast with Top Manufacturers, Trends Click here