Boost your productivity with Digital Bowl Chopper / Cutter

The Bowl chopper/cutter range starts with the Table Top K15 NEO Talsa Bowl Cutter, this machine has variable speed, 3-knife heads with the option to extend to 6-knives for an additional cost. The Talsa K15 NEO runs from a 1ph electric supply. This bowl cutter is capable of holding between 15 liters or 4-12 kg of product at a time. The K30 NEO bowl chopper cutter features 3 knives, 3 knives, and 3 F electric supplies as standard, with the option to raise the 6-knife head. Bowl cutters have a capacity of between 30 liters or 5–22 kg of soft product. The K50 NEO bowl cutter also has variable speed, but comes as standard with a 6-knife head and requires a spacer to make a 3-knife head. This bowl cutter comes as standard with slow mixing speeds in two directions, in both front and back. This bowl chopper/cutter is capable of holding between 50 liters or 7-37 kg of product at any time. The next machine from the K50 NEO is the K80 NEO bowl cutter/chopper. This bowl chopper/cutter is slightly different from the previous two bowl cutters in that it comes with variable speed control that can vary speeds from 1000 rpm to 4000 rpm in steps of 100 rpm at a time. The bowl chopper converts into a 3-knife head with spacers again with 6 knife heads. The K80 NEO Talsa Bowl Chopper comes as standard with slow knife mixing in two directions, but with the option of a motorized unloader.

Benefits of Talsa Bowl Chopper/Cutter K15neo, K30neo:

K15neo • K30neo

With 7″ Digital Touch Screen and variable speed

Cut and emulsify any type of meat mixture and many other food products

• All screws are stainless steel.

• IP65 Watertight Electric Cabinet (K30neo).

• 7 "digital touch screen that displays knife speed, temperature, elapsed time, and the current time.

• Removable 3-knife head, with 6 knives alternately.

• Talsa Bowl chopper has an emergency stop button.

• Knife lid with pneumatic piston (K30neo), automatic stop of the knife when opening lid.

• Programmable automatic stop triggered by temperature range and/or elapsed time

• Strong, all stainless steel construction, solid S / S bowl, and lid.

• Smooth start of knife due to electronic drive, overload protection.

• Low consumption motor + drive = high efficiency.

• Easy access maintenance cover. Adjustable, non-slip, and vibration-absorbing machine legs.

• High-quality BE-GW Stephens (Germany) knife.

• Talsa Bowl Chopper has a transparent noise protection cover.

• The temperature sensor is located in the cavity of the C / F lid: accurate temperature measurement of the mixture during operation.

• Removable friction lid/bowl band with self-adjusting springs for easy cleaning.

• Electric equipment to prevent condensation inside the machine frame.

• Variable speed control 700 to 3.000 rpm and 4-speed preselection buttons.

• Bowl cutter has a high-quality, silent poly-V drive belt.

• Lower part of the machine closed.

• Easy cleaning.

if you want to know about the bowl chopper price then call us

Features of Talsa Bowl Chopper

The 7 el touchscreen indicates the knife speed, temperature, elapsed time, current time.
Variable cutting speed: Variable 750 - 3000 rpm + 4 program speed.
Programmed automatic stops are triggered over time or over the temperature range.
Smooth start of knife and bowl due to electronic drive.
emergency stop button.
Adjustable, anti-vibration machine legs.

Talsa_K50neoK80neo_BowlCutter2018_Brochu

Advantage of Bowl Chopper/ Bowl Cutter K50neo k80neo

The Talsa Bowl chopper has a detachable 6-knife head and compensation rings for use with 3 knives.
BE-GW Ste-sure (Germany) with the high-quality knife, adjustable for bowling at minimum distance.
The optimized cavity design also uses the bottom of the stainless steel lid.
The temperature sensor (sensor F /) C) is located in the cutting cavity for precise measurement of the product temperature in friction.
Control panel with large 7 touches digital touch screen and 6 membrane push buttons.
Variable high cutting speed from 1.000 to 4.000 rpm.
4 Pre-selection knife speeds: 1.000, 2.000, 3.000, and 4.000 rpm.
Variable bowl chopper speed 6 to 18 rpm, 4 pre-selectable speeds.
Knife shafts are designed with dynamic 3D modeling to further reduce vibration.
Mixing speed variable from 50 to 200 rpm, forward and reverse.
4 pre-selection speeds: 50, 100, 150, and 200 rpm.
Variable mixing bowl speeds from 6 to 10 rpm.
IP65 Watertight Electric Cabinet.
Bearings without maintenance, 2 years guarantee.
Polished surfaces, without corners, with CE radius to facilitate cleanliness and to comply with the highest hygiene requirements.
Hygienic labyrinth in the knife head to prevent meat flour from entering the shaft/bearings.
Electronic device to avoid condensation inside the machine.
The lower part of the machine was closed with breathing.
Removable lid/bowl friction band to facilitate cleaning.
Compact and high power goat meat cutting: - K50nb: 22 HP / 16,5 kW - K50npp (with powerplus option): 32 HP / 23,5 kW.
The globally high-energy E class section class IE3 features high-performance ABB motors and VDF electronic frequency converters.
Machine frame, bowl, and all bolts and screws 100% stainless steel AISI304.
Very solid construction. Robust machine frame.
Solid bowl made of strong stainless steel case with the liquid drain plug.
Talsa Bowl Chopper capacity K50npp: ± 37 kg (bs 82 lb) soft meat or kg 25 kg (dog 55 lb) dog meat. K50nb: / 32 / n 20 kg (± 71 / ± 44 lb).
Motorized stainless steel knife lid for lifting and lowering.
The next generation of electronic frequency converters starts and stops the smoothness of knives and bowls.
Talsa Bowl Chopper has an automatic electronic knife safety brake.
Thermal protection on all motors.
Adjustable NGI Denmark feet, non-slip and vibration-absorbing.
Noise protection plastic cover with CE when opening and returning to previous speed.
Standard voltage 400/380 V, other voltages are available.

if you want to know about the bowl chopper price then call us

Features of Bowl Chopper K50neo and K80neo

Bowl Chopper K50neo and K80neo bowl cutters are designed for the production of all types of hashes, for butcher shops, and small industrial meat processors.

They are also suitable for a wide range of poultry, past sh, pastry or vegetarian products, processed cheese, and many items in the food processing industry.

The bowl chopper healthy K50neo and K80neo cut, mix and thicken all types of food products, from coarse to ures ne textures. They are simple to use, have an automated control system, and are easily cleaned and maintained.

Optional:

Interactive recipe guide.

User administration.

Data recording.

Production plan.

Talsa Bowl Chopper control

The Bowl chopper features a modern 7-inch touch screen.

6 membrane buttons for the most commonly used functions.

Digital display indicating gear, blade speed, temperature, turn, elapsed time, current time.

Automatic stop (time elapsed, temperature, bowl turns).

Performance maintenance and service intervals.

Alternative:

Interactive Recipe Guide.

User Administration.

Data recording.

Talsa Bowl Chopper/ Bowl Cutter K50neo k80neo

The Talsa Bowl Chopper has detachable 6 - knife head and compensation rings for use with 3 knives.
Control panel with large 10 touches digital touch screen and 10 membrane pushbutton.
BE-GW Ste-sure (Germany) with the high-quality knife, adjustable for bowling at minimum distance.
Variable high cutting speed from 1.000 to 4.000 rpm. The optimized cavity design uses the bottom of the stainless steel lid. Cut pre-syllable knife speed: 1.000, 2.000, 3.000, and 4.000 rpm.
The temperature sensor (sensor /) C) is located in the cutting cavity for precise measurement of the product temperature in friction.
Variable bowl speed 6 to 18 rpm, 4 pre-selectable speeds.
Knife shafts are designed with dynamic 3D modeling to further reduce vibration.
Mixing speed variable from 50 to 200 rpm, forward and reverse.
4 pre-selectable speeds: 50, 100, 150, and 200 rpm.
Variable mixing bowl speeds from 6 to 10 rpm.
Talsa Bowl chopper capacity K200: capacity 160 kg soft meat or: 100 kg dog / frozen meat (K120: ± 90 / ± 60 kg).
Recommended Options: Hydraulic loader for standard 200-liter trolleys and motorized hydraulic unloading arm for amtie to trolley.
Optional for K120neo: manual unloading arm with the motorized disc.
To cut high strength compact and even solid frozen meat. K200n: 82 HP / 60 kW, with powerplus option 109 HP / 80 kW. K120n: 48 HP / 35 kW, with powerplus option 82 HP / 60 kW.

The Talsa Bowl Chopper has a motorized stainless steel knife lid for eﬀortless lifting and lowering.

Noise protection plastic cover with CE safety clearance of knife speed when coming back when opening and closing previous speed.
The globally high-energy E class section class IE3 features high-performance ABB motors and VDF electronic frequency converters.
IP65 Watertight Electric Cabinet.
The next generation of electronic frequency converters starts and stops the smoothness of knives and bowls.
Bearings without maintenance, 2 years guarantee.
100% Stainless Steel AISI304 (K200).
Polished surfaces, without corners, with CE radius to facilitate cleanliness and to comply with the highest hygiene requirements.
The Bowl cutter has an automatic Electronic Knife Safety Brake.
Very solid construction. Robust machine frame.
Hygenic labyrinth in the knife head to prevent meat flour from entering the shaft/bearings.
Solid bowl made of strong stainless steel cast with liquid drain plug.
Thermal protection on all motors.
Electronic device to avoid condensation inside the machine.
Standard voltage 400/380 V, other voltages are available.
Adjustable NGI Denmark feet, non-slip and vibration-absorbing.
The lower part of the machine was closed with breathing.

if you want to know about the bowl chopper price then call us

Features of Talsa Bowl Chopper / Cutter

The bowl Chopper K120neo and K200neo cutters are designed to produce all types of sausage hashes for large slaughterhouses and industrial meat processors.

They are also suitable for a wide range of poultry, past sh, pastry or vegetarian products, processed cheese, and many items in the food processing industry.

The K120neo and K200neo cut, mix and thicken all types of food products, ranging from coarse. By Ne textures. They are simple to use, have an automated control system, and are easily cleaned and maintained.

if you want to know about the Commercial bowl cutter Machine price in India, meat bowl cutter price in India, Meat bowl chopper Machine Price, buffalo chopper machine price, industrial bowl chopper price in India, Commercial bowl chopper, talsa bowl chopper, We are looking for bulk inquiries from Delhi, Noida, Mumbai, Chennai, Kolkata, Bangalore, Ahmadabad, Hyderabad, Lucknow, Kanpur, Varanasi, Jaipur, Varanasi , Jodhpur, Ajmer, Bikaner, Kota, Udaipur, Agra, Meerut, Bhilwara, Alwar, , Aligarh, Allahabad, Banaras, Mathura, Uttar Pradesh, Jhansi, Ghaziabad, Noida, Bareilly, Moradabad, Saharanpur, Punjab, Chandigarh, Jalandhar, Amritsar, Ludhiana, Bathinda, Pathankot, Patiala, Hoshiarpur, Himachal Pradesh, HP, UP, MP, Shimla, Dharamshala, Uttrakhand, Dehradun, Haridwar, Roorkee, Rishikesh, Rudrapur, Nainital, Udham Singh Nagar, Indore, Bhopal, Jabalpur, Gwalior, Ujjain, Sagar, Ratlam, Satna, Bhavnagar, Jamnagar, Karnataka, Gandhinagar, Davanagere, Belgaum, Hubli, Chitradurga, Coimbatore, Tamilnadu, Madurai, Salem, Gujrat, Surat, Dewas , Vadodara, Rajkot, Trichy, Tiruppur, Erode, Vellore, Kerela, Kochi, Thiruvananthapuram, Kozhikode, AP, Andhra Pradesh, Visakhapatnam, Vijayawada, Warangal, Guntur, Nellore, West Bengal, Asansol, Siliguri, Durgapur, Bardhaman, Bihar, Patna, Gaya, Bhagalpur, Muzaffarpur, Jharkhand, Jamshedpur, Dhanbad, Assam, Guwahati, Ranchi, Agartala, Shillong, Haryana, Karnal, Ambala, Panipat, Rohtak, Hisar, Faridabad, Gurgaon, Maharashtra, Pune, Nagpur, Thane, Nasik, Aurangabad, Rajasthan, Goa, Jammu, Srinagar, J&K, Chhattisgarh, Raipur, Bilaspur, Korba, Odisha , Bhilai, Cuttack, Rourkela, Bhubaneswar, Navi Mumbai, Puducherry , Virar, Kalyan, Bhiwandi, and all over India.

To Know About the Most Important Facts of the Bowl Cutter click on the given link.

What are the benefits of using Bowl Cutters in the Food Industries to know click here